Start of main content

IET announces new amendment to BS 7671 (IET Wiring Regulations)

  • The amendment follows advances in technology enabling a more practical solution for electric vehicle charging installations

The IET has announced a new amendment to BS 7671:2018 (IET Wiring Regulations 18th Edition).  The national Wiring Regulations committee, JPEL/64, today agreed the publication of Amendment 1, which will consist of a stand-alone update to Section 722: Electric Vehicle Charging Installations.

The amendment, which is due to publish in early 2020, will be free to view on the IET website, and only form part of a consolidated new Regulations following the next major amendment to BS 7671, expected in 2022.

The amendment follows advances in technology that were not available when BS 7671:2018 published, enabling a more practical solution for the installation of charging points.  Functionality built directly into charging equipment uses existing technology, but employed in a new way, allowing charging points to be deployed more widely than ever before.

The updated Section 722 will make installing charging points quicker and easier and will reduce the cost of installations for both installers and consumers.

The UK government is investing £400 million to accelerate the roll-out of charging infrastructure to help meet its target of at least 50% of new car sales to be ultra-low emission by 2030*. 

Mark Coles, Head of Technical Regulations at the IET, is proud of the way that JPEL/64 has been able to respond to the changes in technology. He explains: “JPEL/64 has been able to address a new opportunity for electric vehicle charging equipment that provides a practical, cost-saving solution benefiting the industry, consumers and government alike, to help the UK lead the way in the roll-out of infrastructure to support the electric vehicle revolution.

“This update to the IET Wiring Regulations puts the electrical industry at the forefront of driving technological innovation to ensure the installation of practical, safe charging points that are accessible to all.

“By producing Amendment 1 to BS 7671:2018 as a stand-alone, free-to-view document, this updated Section 722 will reach industry much quicker than a full, consolidated amendment would allow, enabling installers to take advantage of BS 7671:2018+A1:2020 as soon as possible.”

Dan Palmer, Associate Director of Committees at BSI added:

“The UK is leading the electric revolution with ambitious plans to deliver cleaner air and a better environment by committing to 50% of new car sales to be ultra-low emission by 2030. The built environment and electrical infrastructure is the first step on the journey to making these green plans possible. BS 7671 Requirements for Electrical Installations. IET Wiring Regulations has been updated in Section 722 to make the installation of electric charging points quicker, easier and less costly. It will help to make electric charging common-sight on UK streets and fuel the growth of the electric car usage.” 

Keep an eye on theiet.org/updates to for information on the Draft for Public Comment and publication information.

--ENDS--

Notes to editors:

Proposed timeline

  • 04 September 2019: Amendment 1 approved by JPEL/64
  • October 2019: The Draft for Public Comment for Amendment 1 will be available for 60 days to allow industry to respond to the proposed changes (see theiet.org/updates for details)
  • January 2020: Amendment 1 will publish as a free-to-view document on the IET website and come immediately into effect, eschewing the usual 6-month adjustment period to ensure industry can immediately take advantage of the changes
  • February 2020: The IET will publish the 4th Edition of the Code of Practice for Electric Vehicle Charging Equipment Installation, incorporating new guidance based on Amendment 1 to BS 7671:2018

*Government stats taken from https://www.gov.uk/government/news/government-launches-road-to-zero-strategy-to-lead-the-world-in-zero-emission-vehicle-technology

 

About the IET

  • We inspire, inform and influence the global engineering community to engineer a better world.
  • We are a diverse home for engineering and technology intelligence throughout the world. This breadth and depth means we are uniquely placed to help the sector progress society.
  • We want to build the profile of engineering and technology to change outdated perceptions and tackle the skills gap. This includes encouraging more women to become engineers and growing the number of engineering apprentices.
  • Interview opportunities are available with our spokespeople from a range of engineering and technology disciplines including cyber-security, energy, engineering skills, innovation, manufacturing, technology, transport and diversity in engineering.
  • For more information, visit www.theiet.org
  • Follow the IET on Twitter.

 

Media enquiries to:

Rebecca Gillick
External Communications Manager
T: 01438 765 618
M: +44 (0)7725 498 129
E: rgillick@theiet.org  

Sophie Lockhart
Senior Communications Executive
T:  01438 765686
M: +44 (0)7872 844 422
E: SLockhart@theiet.org