IET logo
Decrease font size
Increase font size
Topic Title: Cable trench for DC cables
Topic Summary:
Created On: 05 December 2012 03:10 PM
Status: Read Only
Linear : Threading : Single : Branch
Search Topic Search Topic
Topic Tools Topic Tools
View similar topics View similar topics
View topic in raw text format. Print this topic.
 05 December 2012 03:10 PM
User is offline View Users Profile Print this message


Posts: 3
Joined: 10 May 2012

I would appreciate if someone could provide some standards regarding the installation (e.g clearance) of DC power cables buried in a trench.

Are they any specs when installing lots of DC power cables in the same trench?
 05 December 2012 03:21 PM
User is online View Users Profile Print this message


Posts: 16301
Joined: 13 August 2003

what sort of voltages are we talking about?
- Andy.
 05 December 2012 03:56 PM
User is offline View Users Profile Print this message


Posts: 22467
Joined: 23 March 2004

Keep +ve and -ve close together (for each circuit) - ideally use earthed metal containment (SWA cable is ideal) to get a bit of inductance to damp potential inductive surges . Then provide seperation of at least 2 x cable diameter from each circuit.

Personally, I'd be using a pit and duct system with min 100mm dia ducts - one per circuit

Use labelling tapes warning of what's below if you do bury direct or the same above the duct if you go that way



Let the wind blow you, across a big floor.

New here?

See Also:

FuseTalk Standard Edition v3.2 - © 1999-2018 FuseTalk Inc. All rights reserved.