IET
Decrease font size
Increase font size
Topic Title: What it the content that a battery discharger report should have?
Topic Summary:
Created On: 07 February 2013 06:33 PM
Status: Read Only
Linear : Threading : Single : Branch
Search Topic Search Topic
Topic Tools Topic Tools
View similar topics View similar topics
View topic in raw text format. Print this topic.
 07 February 2013 06:33 PM
User is offline View Users Profile Print this message



Jlander

Posts: 1
Joined: 07 February 2013

Hello

What it the content that a battery discharger report should have?

Thank you very much
 08 February 2013 10:39 AM
User is offline View Users Profile Print this message



ArthurHall

Posts: 736
Joined: 25 July 2008

A Battery dischage test draws a fixed current for a certain period of time. At the end of the test the battery voltage should not have dropped below the precalculated minimum voltage.
You normaly take individual cell voltages and specific gravitys every hour.
You can hire machines that you hook up set up and press go and it does every thing for you, except take the SG's.
 09 February 2013 09:22 AM
User is offline View Users Profile Print this message



dlane

Posts: 690
Joined: 28 September 2007

In addition to the above we like to see a visual condition assessment of the battery and its installation.

Prior to starting the test the battery voltage and charging current is also measured.

The report would also then need to make recommendations for any repairs that may be required to bring the system back up to specification.

Kind regards

Donald Lane
 15 February 2013 11:16 AM
User is offline View Users Profile Print this message



Kamikaze

Posts: 1
Joined: 15 February 2013

I also like the battery discharger reports of the Amperis unit since it also includes the graph of the battery voltage and you can see how it slowly diminishes as the test goes on.
Statistics

See Also:



FuseTalk Standard Edition v3.2 - © 1999-2014 FuseTalk Inc. All rights reserved.