IET
Decrease font size
Increase font size
Topic Title: SCROLLING LED DISPLAY
Topic Summary:
Created On: 27 March 2004 05:00 PM
Status: Read Only
Linear : Threading : Single : Branch
Search Topic Search Topic
Topic Tools Topic Tools
View similar topics View similar topics
View topic in raw text format. Print this topic.
 27 March 2004 05:00 PM
User is offline View Users Profile Print this message



deleted_amadigoc

Posts: 1
Joined: 04 May 2002

PLEASE CAN YOU HELP ME WITH THE CIRCUIT OR GIVE A SITE WHERE I FIND THE CIRCUIT FOR SCROLLING LED DISPLAY.
 05 January 2005 01:03 PM
User is offline View Users Profile Print this message



deleted_Ekij

Posts: 89
Joined: 03 February 2004

Why would you want to build one?
The circuits to drive many hundreds of LEDs and the arrays of LEDs are speciliased and are cheeper to buy in ready made units.

Would you consider trying to build a multi-meter? Sure you could but it would cost much much more than buying a pre-made off the shelf one.

PS: DON'T TALK IN BLOCK CAPITALS UNLESS YOU ARE DEATH (or DEAF)
 25 January 2005 10:53 AM
User is offline View Users Profile Print this message



colinfrancisfox

Posts: 27
Joined: 23 October 2002

Welcome,

It has always surprised me that no use has been made of the humble LED in flat
screen design.To my knowledge LED's can be 'pin-prick' size with red,green,
blue and composite.The advantage is very large displays.With three LED
wall displays using front end microntrollers and a CAD PC in X,Y,Z, a virtual
conservatory could be designed.

Best Wishes,
Colin Fox,
Jersey.
 14 September 2005 03:19 AM
User is offline View Users Profile Print this message



deleted_polycomp

Posts: 1
Joined: 14 September 2005

hi, there are some companies that are now making LED material displays.

You may find some infomation at Link removed

Regards
 27 September 2005 03:42 PM
User is offline View Users Profile Print this message



deleted_michaelstone

Posts: 5
Joined: 27 September 2005

Hi,

There are some electronics projects that may be of interest to you. The site below provide tips and references to build practical electronics projects DIY.

Link removed

Edited: 27 September 2005 at 03:48 PM by deleted_michaelstone
 07 March 2007 06:53 AM
User is offline View Users Profile Print this message



deleted_manister

Posts: 1
Joined: 07 March 2007

Hi how do you do. I see your message that PCB circuits for led moving message is available in less price than trying to make it oursleves. Can you please let me know where could I get them actually and how about the interfacing software between the screen and the pc. Thanks
 14 July 2007 02:41 AM
User is offline View Users Profile Print this message



Wasted

Posts: 32
Joined: 12 July 2007

In response to Colinfracisfox's surprise at not more use being made of the humble LED in display screens, I had a brainwave over a decde ago, of the ultimate gaming screen being a LED display dome that one sits under.

Imagine being able to fly or drive in a game with a 360 degree all round view and 180 degree Z axis view. Being able to pull a loop in a virtual aircraft and looking "up" to see the ground whizzing past below.

Basically to have the same view available as a light aircraft pilot.

I was at Uni at the time as a matyre student. I remeber floating the idea with other undergrads, we went to a lab with a whiteboard and started trying to work out the mathematics involved in synchronised pixel movement on a domed screen istead of a flat one, which I, for one have experince of for games, and then it started to become a bit too heavy, someone mentioned that the bar was still open and it was all forgotten about.

This resurfaced the memory.

If anyone wants to pick up the torch on this concept and run with it, be my guest.
 29 April 2009 11:43 AM
User is offline View Users Profile Print this message



koushiktvs

Posts: 1
Joined: 29 April 2009


hi everyone,

i just wanted to prepare a LED based alphanumeric display unit with atleast 6lines of display. can any one please send the circuit diagram and the Ic numbers that are required for the circuit.
 15 September 2013 04:41 PM
User is offline View Users Profile Print this message



ledscreen

Posts: 3
Joined: 15 September 2013

hello,my name is Michael,engneer of Shenzhen Porstar Electronics co.,ltd, Which is professional Manufacture of LED Displays,LED Screen,Rental LED Display, Text message LED Display,Background state led screen etc, if you are interested in our products, please visit us at Link removed

And refer to your questions, please tell me more details about your scrolling LED Displays, after we know detail of your screens, we will try our best to help you make the Circuit of PCB board.

Thanks and hope your early reply.

Michael Chang
michael.chang@porstarled.net
 19 September 2013 10:03 PM
User is offline View Users Profile Print this message



sullivanpeter409

Posts: 2
Joined: 19 September 2013

Hello,
If you are looking for LED displays and LED signs you can check out Link removed Link removed are specialist in advertising via LED signs and LED displays. If you are looking for a new way to promote your business, LED displays are perfect.

Edited: 20 September 2013 at 09:16 PM by sullivanpeter409
Statistics

See Also:



FuseTalk Standard Edition v3.2 - © 1999-2014 FuseTalk Inc. All rights reserved.