Decrease font size
Increase font size
Topic Title: Calibration Procedure for Crimp Tools
Topic Summary:
Created On: 02 July 2010 12:59 PM
Status: Read Only
Linear : Threading : Single : Branch
Search Topic Search Topic
Topic Tools Topic Tools
View similar topics View similar topics
View topic in raw text format. Print this topic.
 02 July 2010 12:59 PM
User is offline View Users Profile Print this message


Posts: 1
Joined: 17 September 2003

Our company is implementing a calibration procedure for crimp tools. The procedure will need to pass external audits such as from LRQA. We are currently looking at implementing an in-house pull-test calibration procedure. We crimp BNCs, TNCs, RJ45 and RJ11 plugs, bootlace ferrules, D-type, and insulated and non-insulated lugs on stranded comms cable. Could someone point us to a procedure or standard we could refer to so we can implement a procedure that will pass external audits. Could someone also suggest a pull-tester that we could purchase. Not sure if we would need different pull-testers for different connectors. Thank you.


See Also:

FuseTalk Standard Edition v3.2 - © 1999-2016 FuseTalk Inc. All rights reserved.