Decrease font size
Increase font size
Topic Title: Ericsson minilink TN3
Topic Summary: ethernet traffic problem
Created On: 31 May 2010 09:43 AM
Status: Read Only
Linear : Threading : Single : Branch
Search Topic Search Topic
Topic Tools Topic Tools
View similar topics View similar topics
View topic in raw text format. Print this topic.
 31 May 2010 09:43 AM
User is offline View Users Profile Print this message


Posts: 4
Joined: 03 March 2004

Hi all,
I am working as a transmission support engineer for a telecom operator where we use the ericsson milink TN R3 as our transmission system.

I am curently having problems where some NPUs (NPU3) do not pass ethernet traffic but TDM traffic flows without a problem. When the NPU card is reset, the traffic will flow for some hours and then hangs again. No alarms are displayed. All configurations have been checked and compared to those working without any problem and they all look fine. I do not suspect the NodeBs as resetting the card seems to clear the problem temporarily.
What could be causing this scenario? Has anyone experienced this before?


See Also:

FuseTalk Standard Edition v3.2 - © 1999-2016 FuseTalk Inc. All rights reserved.