IET logo
 
IET
Decrease font size
Increase font size
Topic Title: Asbestos in fuseboards?
Topic Summary:
Created On: 21 February 2013 10:05 PM
Status: Post and Reply
Linear : Threading : Single : Branch
Search Topic Search Topic
Topic Tools Topic Tools
View similar topics View similar topics
View topic in raw text format. Print this topic.
 21 February 2013 10:05 PM
User is offline View Users Profile Print this message



impvan

Posts: 749
Joined: 07 September 2005

Got a client who's had a deadline given for an asbestos survey. So they've asked me for a 'nothing in the electrics' letter.

'Not on your nelly' is my standard reply...

Now I know they've a 60's MEM board with asbestos fabric arc shields, and a 30's MEM board with asbestos tubes which you thread the wire through..

Question: Wylex 3036 boards: they've a few 90's one's and a couple of 60's ones. The 60's ones have a hard white arc shield pellet, the later ones have a grey arc shield pellet. Are either of these likely to be ACMs?

Regards,

C
 22 February 2013 10:24 AM
User is offline View Users Profile Print this message



burn

Posts: 122
Joined: 06 June 2003

The simple rule for is asbestos is if you are not sure then you must assume it is.
Don't go near it until the client has had it tested and proved it isn't.

burn
 22 February 2013 10:56 AM
User is offline View Users Profile Print this message



Jaymack

Posts: 4586
Joined: 07 April 2004

Don't take risks with the scary stuff for exposure and short durations.

Regards

http://www.hse.gov.uk/pubns/guidance/a33.pdf
 23 February 2013 08:02 PM
User is offline View Users Profile Print this message



ennisteve

Posts: 10
Joined: 10 December 2012

To answer your question, yes some of the earlier arc shield pellets were made from asbestos. Along with arc shields and some door seal ribbons of really old switch gear. As Burn suggests, best to let the experts to decide what is an what isn't ACMs.
Statistics

See Also:



FuseTalk Standard Edition v3.2 - © 1999-2014 FuseTalk Inc. All rights reserved.