Good Afternoon All

can anyone advise if they have come across a 3 pole isolator switch with a combined 1362 fuse holder or any manufacturer that dont specify a FCU to be installed with there extractor fan.
as i want to reduce the amount of equipment in the shower room but remain withing regs.

or your opinions on not installing the isolator as the shower room has a window allowing adequate light to enable maintenance during daylight hours however unsure how i would stand regarding Building Regs.

also to reduce the work in chiseling out walls will be fititng the switches inside the bathroom but outside 0.6 of zone 2.

any advice or opinions appreciated.

P.S all other areas of the install complys e.g RCD's R<50/I

Regards

Martin

edit: see DR2366's posts:

http://www.theiet.org/forums/f...tid=205&threadid=44983