IET logo
 
IET
Decrease font size
Increase font size
Topic Title: MEM 2
Topic Summary: Spares
Created On: 03 May 2015 10:30 AM
Status: Read Only
Linear : Threading : Single : Branch
Search Topic Search Topic
Topic Tools Topic Tools
View similar topics View similar topics
View topic in raw text format. Print this topic.
 03 May 2015 10:30 AM
User is offline View Users Profile Print this message



Zs

Posts: 3814
Joined: 20 July 2006

Hello,

You may have read that I had issues tracking down a replacement incomer for a memshield 2 board. In this case L1 had failed on a 4 pole 30mA RCCBO. I thought I had one at £162 plus VAT but that turned out to be incorrect, it was a 100mA so wasn't any good.

In the end, a beautiful new Hager Invicta is in place and the RCBO is on the way ready for the irrigation system to be fired up for the summer. They are great aren't they? I love the removable top and bottom panels so that we can cut our holes on a work bench at a decent angle.

Anyway, I took a hammer to the faulty RCBO so that it doesn't end up on ebay or anything like that but I did salvage a TP type B 10A switch and SP type B 32 x 1 6 x2 and 20 x1. I've stashed them in the garage so let me know if ever you need them. I didn't bother with the board itself but it is still there so if you think you need the metalwork that's not out of the question. I'll be back there to do the RCBO so I could rummage in the bin. It was a 4 way.

Zs
Statistics

New here?


See Also:



FuseTalk Standard Edition v3.2 - © 1999-2017 FuseTalk Inc. All rights reserved.

..