IET logo
 
IET
Decrease font size
Increase font size
Topic Title: Memshield 2 RCBO
Topic Summary: for your information
Created On: 22 November 2014 11:59 AM
Status: Read Only
Linear : Threading : Single : Branch
<< 1 2 Previous Last unread
Search Topic Search Topic
Topic Tools Topic Tools
View similar topics View similar topics
View topic in raw text format. Print this topic.
 23 February 2015 03:40 PM
User is offline View Users Profile Print this message



tattyinengland

Posts: 994
Joined: 23 November 2006

Cornelec - I too have lost jobs in the same manner. I can understand why - an MCB and RCBO Pod for a MEMShield 2 is about £85. (£20 for the MCB and £65 for the pod).

10 or more of those circuits and it adds up to quite a lot.

Once I start heading towards being really uncompetitive (If I know I'm in a price war) I have installed a separate "DB" right near by the existing DB, with only double pole, din rail mounted RCDs on it, labelled up for the circuits that they protect. Some extensions of cables is of course required.

You can install 63Amp, 30mA double pole RCDs onto the din rail for fairly cheap in comparison to the MEMSheild 2 RCBO pods. and for every circuit under 63Amp.

A possible consideration for the future? It only really works if you have loads to do or the extra labour required makes a non sense of the extra materials cost.
 23 February 2015 08:16 PM
User is offline View Users Profile Print this message



hertzal123

Posts: 472
Joined: 26 August 2007

Having recently replaced 1 mem mcb with a pod unit and mcb at a cost of £92 00 each,I a feel replacing a large number would be far too expensive and would be tempted to change the board.
Hz
IET » Wiring and the regulations » Memshield 2 RCBO

<< 1 2 Previous Last unread
Topic Tools Topic Tools
Statistics

New here?


See Also:



FuseTalk Standard Edition v3.2 - © 1999-2017 FuseTalk Inc. All rights reserved.

..