IET
Decrease font size
Increase font size
Topic Title: Home Bus System - ET2101
Topic Summary: Communication protocol used by Japanese A/C manufacturers
Created On: 09 December 2009 04:20 PM
Status: Read Only
Linear : Threading : Single : Branch
Search Topic Search Topic
Topic Tools Topic Tools
View similar topics View similar topics
View topic in raw text format. Print this topic.
 09 December 2009 04:20 PM
User is offline View Users Profile Print this message



cdchilds

Posts: 1
Joined: 08 March 2007

Hi,

I am looking to interface to the 2-wire communications bus (HBS) that is commonly used in A/C equipment. The protocol is described in the following document, but I cannot find it as it is old (1988):

"ET-2101 Home Bus System (HBS)",Standard of EIAJ & REEA, Technical Committee on HBS, 9,1988.

I have found a Mitsumi IC that implements the physical layer, however I still need to implement the HBS protocol in the microcontroller:

http://www.mitsumi.co.jp/Catal...f/commun_mm_1034_e.pdf

If you have knowledge of the HBS protocol, any assistance or insight you could provide would be greatly appreciated.

Chris Childs MIET
 31 July 2012 10:56 AM
User is offline View Users Profile Print this message



xorteleco

Posts: 1
Joined: 31 July 2012

Hi cdchilds,

Ithink that i have the same problem than you, but in my case I have any idea about the physical layer protocol. The data link layer protocol I don't know how it is. Could you help me with my problem?

I know that my frame check secuence hace 8 bits, but I don´t know how to calculate.
Statistics

See Also:



FuseTalk Standard Edition v3.2 - © 1999-2014 FuseTalk Inc. All rights reserved.